











Trough-250
For Wildlife, Domestic Animals & Bats. Includes Float-Valve
8 Ft Long x 34″ W x 22″ H
250 Gallon Tank
Built-In Escape Ramp
1/2” Float-Valve Protected Under Ramp
10″ Hatch for Easy Access
A Line-in and Drain Plug on Both Sides of Tank
Separate Top and Bottom. Multiple Units Nest for Shipping
Double Wall Construction
1/2” Sidewall Drain Plug to Lower Water Level in Winter
Weight 160 lbs
For Wildlife, Domestic Animals & Bats. Includes Float-Valve
8 Ft Long x 34″ W x 22″ H
250 Gallon Tank
Built-In Escape Ramp
1/2” Float-Valve Protected Under Ramp
10″ Hatch for Easy Access
A Line-in and Drain Plug on Both Sides of Tank
Separate Top and Bottom. Multiple Units Nest for Shipping
Double Wall Construction
1/2” Sidewall Drain Plug to Lower Water Level in Winter
Weight 160 lbs
For Wildlife, Domestic Animals & Bats. Includes Float-Valve
8 Ft Long x 34″ W x 22″ H
250 Gallon Tank
Built-In Escape Ramp
1/2” Float-Valve Protected Under Ramp
10″ Hatch for Easy Access
A Line-in and Drain Plug on Both Sides of Tank
Separate Top and Bottom. Multiple Units Nest for Shipping
Double Wall Construction
1/2” Sidewall Drain Plug to Lower Water Level in Winter
Weight 160 lbs

This heavy duty trough provides water for wildlife, domestic animals and bats. It’s also suitable for use in “Wildlife Partner Programs”.
Our trough includes a built-in escape ramp, with aggressive traction surface to give small animals an easy exit. A large 10″ hatch provides easy inspection of the protected float-valve system under ramp. Note: Escape ramp is designed for small animals only and should not be used by large animals to enter or exit trough.
The Trough-250 can be installed in-ground if it is properly framed-in with cement block to provide proper support. Please see the plans provided below for an example.




The Trough-250 weights in at 160 lbs. Top and bottom separate which allows you to nest and ship multiple units. Assembly is simple with 8 stainless steel bolts.
Rainmaker products are made of durable polyethylene. It’s impervious to freezing and UV tolerant. This trough includes double-walled construction and has a .22″ wall thickness. It has an overlapping lid and large gussets for strength. Sidewalls are also reinforced with aluminum angle iron to reduce sidewall deflection due to water pressure.
A 1/2” drain plug is located on the sidewall. This allows you to lower the water level in wintertime if you are located in an area with long, hard freezes. This can reduce the chance of damage due to ice expansion.

The float-valve system is protected under the escape ramp and can be accessed through the hatch.
The valve is made of PVC and stainless steel to minimize calcification and mineralization issues. The float Valve system includes a stainless steel chain and rod, and a polyethylene float.
Troughs “nest” together to reduce shipping cost. Up to 6 units can fit on one pallet for easy shipping.